You’ll inevitably encounter clogged Unclog a Drain as a homeowner. Despite the ease and temptation to use liquid drain cleaners, there are more effective and less damaging methods to unclog drains. On the market, a variety of items are made for chewing through the nastiest of things that clog up your drains. However, those products typically contain nasty chemicals that can harm your health and cause damage to your plumbing. If you’re interested in clearing a drain, try these simple DIY methods before contacting a plumber or buying chemicals! Using these methods will help you unclog your drains without using chemicals.
1-A Wire Hanger:
An effective way to unclog a drain is to grab a wire hanger from your closet. Using pliers to straighten it out, wire coat hangers can be bent 90 degrees. If you want to catch foreign particles, ensure that the hook’s length is small enough to pass through the basket strainer. Curl one end into a small hook after straightening it out as much as possible. It should catch around hair and other gunk accumulated in the drain when you fish that end into it. Once the hangar has been pulled out, clean off the hook and snake it down the drain until it no longer pulls anything up. Clear out any remaining debris by running hot water through the drain after you’re done.
2- Using a drain snake:
The drain snake, also known as a pipe snake, plumber’s snake, or drain auger, reaches clogs deep within the pipe that no coat hanger can resemble. It consists of a flexible metal cable coiled inside a drum and used as a manual tool. When the drum is turned, the cable is extended until it reaches 25 feet into the drain system. The clog is grabbed by the metal corkscrew-like end. Having attached the clog to the cable, it is pulled straight out.
Known for their effectiveness in removing fibrous clogs from toilets, kitchen sinks, tubs, and showers, drain snakes are highly efficient at eliminating clogs deep in the drain system.
3- Utilize a plunger:
Plungers are flexible rubber bells or cones that have handles at the ends. With a plunger, water forces its way down the drain pipes. Drain-clearing methods such as this work best at unclogging toilets and moderately at clearing kitchen sinks, tubs, and showers. Bathroom sinks sometimes need to be fixed with plungers due to their configuration.
A plunger uses air pressure to remove clogs. Put petroleum jelly around the suction rim. To make a tight seal, use the plunger to cover the drain. The drain should be clogged with fast, repeated pressure for three minutes. Pull out the plunger. You should turn on the faucet’s hot water for three minutes and its cold water for two minutes to see if the drain is moving. Ensure that the process is repeated two more times.
4- Use baking soda and vinegar to flush the drain:
By combining baking soda and vinegar, you can create a drain cleaner similar to liquid drain cleaners but with a less harsh effect on your pipes. Using 1/3 cup baking soda and 1/3 cup vinegar, mix them together. As a result, it will fizz within a few seconds; you should pour it down the clogged drain immediately, so you don’t lose the benefits. Before flushing the drain with hot water, let the drain sit for at least an hour (if possible, overnight). It can be used for all types of drains – kitchens, bathtubs, basement sinks, etc.
5- A mixture of baking soda and salt:
Grit and grime can be easily removed with baking soda, a fantastic natural cleaner. Added baking soda to vinegar and boiling water will produce a powerful, chemical-free unclogging compound. When baking soda and salt combine, they create a chemical reaction that helps clear even the most stubborn drain clogs. In order to unclog clogged pipes, combine 1/2 cup salt with 1/2 cup baking soda. Rinse everything after sitting for 15 minutes with boiling water.
6- Using a liquid dish detergent and hot water:
There’s nothing worse than grease congealing in your pipes and clogging a sink drain. If you’ve got a grease clog, break it up with dish soap, which you probably have next to your sink. Clogged toilets can be unclogged by pouring liquid dish detergent and hot water down the drain. Pour 1⁄14 cup (59 ml) of dish detergent into the toilet bowl. Due to its density and weight, it should sink to the bottom. Afterward, let it sit for at least 20 minutes. In the meantime, fill a container with hot water and pour it into the toilet bowl gently. Make sure the bowl is not overflowed with hot water. Don’t forget to plunge into the toilet until it is clear.
Hope these tips will help you, If you find any other tips useful, share them with us in the comment section.